Space Walk is the final escape room in Escape Simulator in Adrift in Space.
In this quick guide, you’ll learn the answers for Space Walk in Adrift in Space in Escape Simulator.
This includes the first keypad, E2 door, E1 door, fuel tank, red battery, laser source, second keypad, first hatch, second hatch, and how to connect the pipes.
- First Keypad
- E2 Door
- E1 Door
- Fuel Tank
- Red Battery
- Laser Source
- Second Keypad
- First Hatch
- Second Hatch
- Connect the pipes
1. First Keypad
There is a note next to the first keypad that says, “The keypad still accepts password only in ascending order”.
Click on the keypad to open it.
The keypad contains 4 numbers that are smudged.
Those 4 numbers in ascending order are the passcode.
Enter “2”, “3”, “5”, “7” and click on the tick.
Open the compartment and collect the Laser Source.
2. E2 Door
Click on the switch next to the “E2” door to open it.
Connect the blue wire to the extreme left and connect the green wire to the extreme right.
Connect the red wire next to the blue wire and connect the yellow wire next to the green wire.
Hence, the correct order is, “Blue”, “Red”, “Yellow”, “Green”.
3. E1 Door
Click on the switch next to the “E1” door to open it.
Now, you need to connect the wires similar to the “E2” door.
Connect the blue wire to the extreme left and connect the green wire to the extreme right.
Connect the red wire next to the blue wire and connect the yellow wire next to the green wire.
Hence, the correct order is, “Blue”, “Red”, “Yellow”, “Green”.
4. Fuel Tank
Click on the Door Control Unit.
Click on “Sensors” to check the status of each tank.
According to the pie chart, Ix = 50%, N = 16.6%, and O = 33.4%.
The total fuel weight is 12t.
Ix = 12 x 50% = 6.
N = 12 x 16.6% ≈ 2.
O = 12 x 33.4% ≈ 4.
Click on the Fuel Tank Monitor.
Enter “4”, “6”, and “2” in “O”, “Ix”, and “N” respectively.
Click on “Verify” to verify the status of the tank.
5. Red Battery
Use the Crane Control Unit to take out the red battery.
Drop the red battery on the ground.
The battery will contain a red status.
Click on the red status to collect it.
6. Laser Source
Examine the red status and click on the lock to open it.
Drag and drop the laser source from your inventory into the laser source holder.
Place the status inside the battery.
Use the Crane Control Unit to place the battery back into the engine.
7. Second Keypad
Open the compartment under the second passcode.
Collect the tablet in the compartment.
Examine the tablet and look behind it.
The back of the tablet contains a note about the second passcode.
Enter “1”, “5”, “3”, “1” and collect the pipes in the compartment.
8. First Hatch
Click on the Door Control Unit and click on “Grid”.
Hatch #3 is locked, so you need to enter the code for it.
You need to refer to the tablet for this.
Enter “C06” and click on “Submit” to unlock hatch #3.
9. Second Hatch
Hatch #1 is also locked, so you need to enter the code for it.
Enter “B04” and click on “Submit” to unlock hatch #1.
10. Connect the pipes
Use the pipes and connect E1 and E2 to the working Fuel Tank Monitor. Do not connect the pipes to the broken Fuel Tank Monitor.
Open all of the floor panels.
To get the fuel to work, you need to use the pipes to connect E1 and E2 to the working fuel tank monitor.
You don’t have to connect the pipes to the broken fuel tank monitor.
Connect the pipes according to the screenshot above.
Lastly, click on the switch on the Door Control Unit to escape Space Walk in Adrift in Space!
Further reading
Escape Simulator Decompression Chamber Walkthrough
