The Lab is the third escape room in Escape Simulator in Adrift in Space.
In this quick guide, you’ll learn the answers for The Lab in Adrift in Space in Escape Simulator.
This includes the coolant, sodium aluminate, molecular models (keypad), supply cabinet, controller, Nitrogen, crystal, and crystal slot!
1. Coolant

Collect the Helium and place it inside the canister slots of the Fabricator.
Click on the Fabricator and select “Coolant”.
Make a “Coolant” pattern (according to the screenshot above).
Collect the Coolant Container.
Place the Coolant in the Coolant Slot.
2. Sodium Aluminate

Open the Metal Recycling compartment and collect a Soda Can.
Place the Soda Can inside the Material Slot.
Open the right drawer under the Fabricator.
Collect the Sodium Hydroxide inside the drawer.
Place the Sodium Hydroxide in the canister slot.
Based on the whiteboard you need to combine aluminum with Sodium Hydroxide to get Sodium Aluminate.
Click on the chemical combiner and click on “Combine”.
Collect the Sodium Aluminate.
3. Molecular Models

You need to find the different Molecular Model and count the number of atoms it has. There are two models containing 3 red atoms and one model containing 2 red atoms. Hence, the different model has “2” red atoms. There are two models containing 4 white atoms and one model containing 3 white atoms. Hence, the different model has “3” white atoms. Finally, there are two models containing 2 blue atoms and one model containing 3 blue atoms. Hence, the different model has “3” blue atoms. Therefore, the passcode is “2”, “3”, “3”.
Collect the first molecular model under the periodic table.
Open the drawers under the Fabricator and collect the other 2 molecular models.
Collect the Tablet above the Metal Recycling compartment.
The tablet says that you need to find the differences between the 3 molecular models—one for each atom.
Click on the keypad under the whiteboard.
The correct answer is “2”, “3”, “3” (for the keypad).
Editor’s note: The hint in the tablet (Medical Log 4) is badly phrased. Instead of “Find the differences”, a more accurate hint would be “Find the different molecular model”.
Collect the Controller and the Blowtorch inside the compartment.
4. Supply Cabinet

Inspect the Blowtorch from your inventory.
Click on the red button on the Blowtorch to turn it on.
Use the Blowtorch to open the vent on the Supply Cabinet door.
5. Controller

Inspect the Controller from your inventory.
Turn the Controller behind.
The back of the Controller contains a note saying that 8 and 10 = O + NE = ONE = 1.
Hence, “8-10” on the controller is “1”.
Now, you need to find the numbers for “90-75” and “99-119” respectively.
For this, you need to refer to the periodic table.
According to the periodic table, “90” is “Th” and “75” is “Re”.
Hence, “90-75” is “3”.
According to the periodic table, “99” is “Es” and “119” is Ix”.
Hence, “99-119” is “6”.
Therefore, the passcode for the Controller is “1”, “3”, “6”.
6. Nitrogen

Collect the Robot on the ground and place it inside the Supply Cabinet.
Inspect the Controller from your inventory and connect it to the Robot.
Control the Robot and knock down the metal pole with it.
After you’ve knocked down the metal pole, the Nitrogen canisters will drop, and the connection will be lost.
Look inside the supply cabinet and collect the Nitrogen.
7. Crystal

Place the Sodium Aluminate and the Nitrogen inside the canister slots of the Fabricator.
Click on the Fabricator and select “Crystal”.
Make a “Crystal” pattern (according to the screenshot above).
Collect the Crystal Container.
8. Crystal Slot

Adjust the Crystal Slot until it says “Structural damage detected”.
Place the crystal inside the Crystal Slot.
Click on the door on the right to escape The Lab in Adrift in Space!
Further reading
Escape Simulator Hallway Accident Walkthrough